I bought a Project Diva Arcade Future Tone Cabinet!

Gotcha!
Is there is a certain dll or such needed to get the game to use the JVS when using pdloader?

thanks again btw

 

Yeah that seemed to work. But Touchscreen still not working. im guessing a digitizer issue then

 

Yah,
I got the game running fine now thanks. After taking touchscreen off and cleaning it, and inspecting the cable everything seemed fine, but still no success.

To confirm the touchscreen connector has a 6x6 connector with one those sides having two white stickers on it covering the ports. The controller has a 4x5 pin, so I’m assuming it goes 4pins on top and 6 on the bottom. Cause it wouldn’t fit any other way.
If so then I guess my touchscreen
Is bad

 

My Diva can only choose different clothing models when playing online. I want to know how to use the local mode. I replaced the hard disk with windows 8.1 and CPU e3-1230v2. Replaced GPU: gtx1050. A special version of pdloader is used. The driver of the original Nu system is installed.

 

Hi wanted to download the scans of the arcade, but unfortunately it's not available anymore. Could someone please reupload? :)

 

thank you so so much :) i love your videos btw. thanks

 

How did you get access to the disk drive of the arcade?

I tried sniffing the Bitlocker key using this method to no avail. Tested 3 different LPC Bus decoders and wrote my own, but the key data is just not there.

 

Understand.

Finding the Game is easy but i could not get a hold of JVS Card Drivers.

The 4 channel audio is also not working (ALC892). Audio will also not work if the speakers are re-connected while the game runs. The original system does not behave like that. Could be a Windows issue (i don't normally use Windows so i have no idea what i am doing). Minor issue anyway.

 

PD Loader has some possibility to run game somehow on AMD GPUs, but some people said to me that some songs has very big framedrops somewhere, if scene is very hard for AMD GPU.

 

So I have a question? I'm missing these wires on my arcade and was wondering if anyone has any idea on how to replicate or manage to find where I can buy these wires? Can I have them custom-made? any help would be much appreciated! The first image is of my PCB.

 

This connector I really do not know where to get, but I'm pretty sure there is 2,54mm distance between contacts,

so you can use something like this and just solder wires to contacts and isolate them with heat shrink.



About this I'm pretty sure too that there is 2,54 distance and it looks like horizontal JST XH 2,54mm,

so can be used something like this, but again, you need to verify that everything is correct, Or may be @Doctopus know better from photo can understand what exactly connector it is and can help to find it's definition.